Plumbing Service Pittsburgh | AC Repair In Pittsburgh | wahlheatingandcooling.com

 

DON’T KEEP YOUR HOUSE IN THE COLD

 

Get a Furnace Tune-Up for $84.00. That’s $10 OFF!*

Includes:

  1. Check burner assembly to improve combustion, reducing waste heat
  2. Check the burners for more efficient burns, saving energy
  3. Check Ignition assembly to ensure reliable operation on demand
  4. Inspect the heat exchanger to ensure safe operation and the absence of cracks from metal fatigue
  5. Inspect the furnace venting and measure combustion to ensure safe operation and the absence clogs, cracks, or leaks
  6. Verify the flue draft to ensure that dangerous gas byproducts are properly venting to the outdoors and flue pipes are free from obstruction.
  7. Check thermostat for accurate control to prevent system from running longer than necessary, increasing utility usage.
  8. Check refrigerant charge to ensure optimum levels leading to lower utility usage and protect compressor
  9. Test capacitors to ensure reliable operation and continued compressor and motor function.
  10. Check crankcase heaters to ensure proper compressor protection.
  11. Inspect and test controls and safeties to keep operating costs low and prevent failures.
  12. Check fan switch to preventer wasted energy and excel sound levels from nuisance cycling
  13. Inspect filters to improve indoor air quality, reduce energy usage, reduce strain on motors, heat exchanger, and compressor.
  14. Check blower assembly to extend motor life, improve air quality, reduce sound
  15. Check air flow to ensure reliable operation and extend parts and equipment life
  16. Visually inspect duct work to identify obvious leaks, which reduces system efficiency and increase utility expense.
  17. Check electrical connections to ensure uninterrupted system operation
  18. Measure and record voltage and amperage to identify baseline operating conditions
  19. Lubricate all moving parts to maintain efficiency and extend equipment life
  20. Check inside evaporator coil – a clean evaporator coil can restore heat restore heat transfer efficiency and reduce utility costs
  21. Clean outside condensing unit – a clean condenser coil can restore heat restore heat transfer efficiency and reduce utility costs
  22. Flush condensate drains – to prevent water damage and the potential for mold formation
  23. Clean condensate pump – to prevent water damage and the potential for mold formation
  24. Combustion analysis report to tell you how your furnace is truly operating
  25. Measure Humidity – for energy efficiency and to increase comfort / prevent mold
  26. Review Comfort Issues – for customized equipment settings
  27. Measure / Adjust gas pressure – to prevent breakdowns and increase efficiency
  28. Check for gas leaks – for safety and to improve efficiency
  29. Accessory check – to prevent breakdowns, prevent water damage, and to ensure clean healthy air
  30. Safety inspection – to prevent safety issues and property damage

*Mention Promo code 180301TU84. Can not be combined with other offers. Offer ends 3/1/18.

 

 

Take $30.00 OFF 3 Tune-Ups and Enrollment in our Preferred Customer Maintenance Agreement*

Preferred Customer Maintenance Agreement:  New customer enrollment special JUST $252.00 

Membership Benefits Include:

  • $25.00 Off of Service Fee’s
  • Priority Scheduling
  • The Value Rate of up to 15% off of repairs
  • 12 month Extended Labor warranty on repairs
  • Warranty Protection
  • Inflation Protection

*Mention Promo Code 180301ESA.  Cannot be combined with any other promotional offers or discounts. Call for details. Offer expires March 1, 2018.

 

$49 Unit Inspection – Savings of $50.00!!*

Noisy furnace? Funny smell? Cold spots or uneven heat? Get Wahl and get …

  • Guaranteed up-front pricing
  • Repair warranties up to 12 months

The inspection checklist:

  1. Check burner assembly to improve combustion, reducing waste heat
  2. Check the burners for more efficient burns, saving energy
  3. Check Ignition assembly to ensure reliable operation on demand
  4. Inspect the heat exchanger to ensure safe operation and the absence of cracks from metal fatigue
  5. Inspect the furnace venting and measure combustion to ensure safe operation and the absence clogs, cracks, or leaks
  6. Verify the flue draft to ensure that dangerous gas byproducts are properly venting to the outdoors and flue pipes are free from obstruction.
  7. Check thermostat for accurate control to prevent system from running longer than necessary, increasing utility usage.
  8. Check refrigerant charge to ensure optimum levels leading to lower utility usage and protect compressor
  9. Test capacitors to ensure reliable operation and continued compressor and motor function.
  10. Check crankcase heaters to ensure proper compressor protection.
  11. Inspect and test controls and safeties to keep operating costs low and prevent failures.
  12. Check fan switch to preventer wasted energy and excel sound levels from nuisance cycling
  13. Inspect filters to improve indoor air quality, reduce energy usage, reduce strain on motors, heat exchanger, and compressor.
  14. Check blower assembly to extend motor life, improve air quality, reduce sound
  15. Check air flow to ensure reliable operation and extend parts and equipment life
  16. Visually inspect duct work to identify obvious leaks, which reduces system efficiency and increase utility expense.
  17. Check electrical connections to ensure uninterrupted system operation
  18. Measure and record voltage and amperage to identify baseline operating conditions
  19. Lubricate all moving parts to maintain efficiency and extend equipment life
  20. Check inside evaporator coil – a clean evaporator coil can restore heat restore heat transfer efficiency and reduce utility costs
  21. Combustion analysis report to tell you how your furnace is truly operating
  22. Measure Humidity – for energy efficiency and to increase comfort / prevent mold

*Mention Promo Code 180301UI49. Cannot be combined with any other promotional offers or discounts. Call for details. Offer expires March 1, 2018.

 

 

 

 

 

 

 

 

 

 

 

Wahl Family Heating, Cooling & Plumbing BBB Business Review